This package contains :

1. 6Ft round Stock Tank pool

2. Poolex Filter Max Pro

3. Inlet and outlet connections

4. Pre-drilled holes in the stock tank

5. Pool hoses

Turn warm afternoons into effortless summer escapes with this Round Stock Tank Pool Package—a perfectly balanced mix of rustic charm and modern pool performance. Designed for sun-drenched gardens, lazy dips, and golden-hour hangs, this setup brings that breezy summer-in-the-yard feeling without the fuss of a traditional pool.

At the heart of it all is a round stock tank pool, sturdy, stylish, and irresistibly inviting. Paired with the Poolex Filter Max Pro, your water stays crystal clear while you focus on the important things—bare feet on grass, cool drinks, and the sound of water gently splashing. Thoughtfully pre-drilled holes and included inlet and outlet connections mean setup is smooth and stress-free, while pool hoses tie everything together for seamless circulation.

PLEASE NOTE that no heating system is part of this package.

* Please get in touch if you wish to collect from our base in Sallynoggin , Co. Dublin free of charge.

* minor dents and scratches are inevitable during transport. This will not adversely affect the quality whatsoever and is part and parcel of the rustic and authentic appearance of these stock tanks. For technical reasons, the diameter of the products supplied may vary approx. 10 cm to 15cms from the specified diameter.

Package contains :

1. 6Ft ROUND tankkd Black label Stock Tank

2. Poolex O’Spa 5kW Heater / Chiller/ Cooler (this can provide both cold and heat)

3. Poolstar Filter pump

4. Inlet and outlet connections

5. Pre-drilled holes in the stock tank

6. Pool hoses

The package has been put together so that you have everything to make the connection between tank and device.

Turn warm afternoons and cool evenings into effortless summer escapes with this Round Stock Tank Pool Package—a perfectly balanced mix of rustic charm and modern pool performance. Designed for sun-drenched gardens, lazy dips, and golden-hour hangs, this setup delivers that breezy summer-in-the-yard feeling without the fuss of a traditional pool.

At the heart of it all is a round stock tank pool—sturdy, stylish, and irresistibly inviting. It’s paired with the Poolex Filter Max Pro to keep your water sparkling clean, while the included Poolex 5kW heater extends your swim season, gently warming the water so every dip feels just right. Thoughtfully pre-drilled holes with inlet and outlet connections make installation smooth and stress-free, and the included pool hoses tie everything together for seamless circulation. Less setup, more soaking—exactly how summer should feel.

• Please note that both the filter pump and Heater / cooler come with a 2 pin European plug. You will need You will need an adapter and a sheltered area or an electrical box big enough to hold them both.

Choose your Stock Tank size below

View Poolex Cooling/Heating device spec sheet HERE

View poolstar Filter Maxspec sheet HERE

• Please get in touch if you want a quotation for Installation or if you wish to collect from our base in Sallynoggin , Co. Dublin free of charge.

Package contains :

1. Oval tankkd Green label Stock Tank

2. Poolex O’Spa 5kW Heater (this can provide both cold and heat)

3. Fittings

4. Poolstar Filter pump,

The package has been put together so that you have everything to make the connection between tank and device. It is very simple so that you can enjoy your garden pool.

Key Features:

• Oval shape for comfortable, full-body immersion

• Integrated cooling and heating system for year-round temperature control

• Powerful filtration system for clean, circulating water

• Durable galvanized steel construction built for outdoor use

• Set and maintain your ideal temperature with minimal effort

• Please note that both the filter pump and Heater / cooler come with a 2 pin European plug, You will need an adapter and a sheltered area or an electrical box big enough to hold them both.

Choose your Stock Tank size below

View Poolex Heating device spec sheet HERE

View poolstar Filter Maxspec sheet HERE

Installation Guide HERE

• Please contact us before purchasing this product to get a lead time as this product is not always in stock

  The covers are made in Belgium. Due to their sturdiness, they cannot be blown away in rain, wind. The covers fit seamlessly on the tanks. The inside of the covers are made with class 1 insulation so that the heat/cold is retained longer. Thermocovers are always custom-made for our tanks

Material: Vegan Leather

Colour: Black

* Please get in touch if you wish to collect from our base in Sallynoggin , Co. Dublin free of charge.

• Please contact us before purchasing this product to get a lead time as this product is not always in stock

  Complete your Tankkd with our durable Thermocovers.

The covers are made in Belgium. Due to their sturdiness, they cannot be blown away in rain, wind. The covers fit seamlessly on the tanks. The inside of the covers are made with class 1 insulation so that the heat/cold is retained longer. Thermocovers are always custom-made for our tanks

Material: Vegan Leather

Colour: Black

* Please get in touch if you wish to collect from our base in Sallynoggin , Co. Dublin free of charge.

These high-end cedar wood lids are made to order, so please allow additional time for delivery.

Expertly crafted from premium-quality cedar wood in Ireland, each piece features a natural finish that beautifully showcases the unique grain and character of the timber. Lightweight by design, the cedar makes each lid easy to handle and lift.

The 3ft and 4ft oval designs are crafted without hinges for a clean, seamless appearance, while the 5ft and 6ft options include hinges for enhanced practicality and ease of use.

• Material: Cedar Wood
  Colour: Natural

* Please get in touch if you wish to collect from our base in Ballyogan Business Park , Co. Dublin free of charge.

The Tanktribe Fire Pit is the perfect size for most Irish gardens, patios and outdoor entertaining spaces. Large enough to create impressive heat and atmosphere, yet compact enough to fit comfortably into smaller outdoor areas.

Dimensions

Diameter: 490mm (19.3")

Height: 445mm (17.5")

The S500 is ideal for 2–8 people gathering around the fire and provides a beautiful focal point for outdoor seating areas, cold plunge zones, hot tub spaces and garden retreats.

Its elevated design and efficient airflow system help produce a hotter, cleaner burn while keeping the overall footprint compact and practical. The stainless steel construction offers excellent durability and corrosion resistance, making it well suited to Ireland's outdoor conditions.

Whether you're enjoying a summer evening with friends or adding warmth to a winter garden setup, the Tanktribe Fire Pit delivers the perfect balance of performance, style and portability.

A small wooden stirring paddle for hot tubs is a simple yet essential tool designed to gently mix and circulate water or additives without disturbing the relaxing atmosphere. Crafted from durable, water-resistant wood, it offers a natural, rustic aesthetic that complements outdoor spa environments. Its compact size and smooth, ergonomic handle make it easy to grip and maneuver, allowing for controlled stirring in tight spaces. Ideal for evenly distributing hot tub treatments, fragrances, or temperature layers, this paddle combines practicality with a timeless, handcrafted feel.

• Please contact us before purchasing this product to get a lead time as this product is not always in stock

Our Tankkd cover is lightweight and custom made from our stock tanks. Due to the black color, it fits perfectly with the character that our tanks radiate.

The covers are made of oxford fabric with a PU coat which makes them water resistant and super light so easy to use. Each cover comes in a handy storage bag.

The fabric cover is a summer cover that can fly away in strong winds. Here you can optionally use magnets or wood to hold it in place.

* Please get in touch if you wish to collect from our base in Sallynoggin , Co. Dublin free of charge.

Watery Cleaning Net for Ice Baths & Hot tubs
Keep your Oval Stock tank pool spotless in seconds with this small Cleaning Net easily that scoops up leaves, ice chips, hair, and other small debris from the water’s surface, helping maintain clear, hygienic water between sessions. Lightweight and effortless to use.

How to use
Gently sweep the net across the surface to collect debris.
Shake off excess water and hang to dry after use.

Clear water. Every time.

The white pool thermometer features an easy-to-read scale in both Celsius and Fahrenheit. It floats on the water’s surface and includes a string for secure attachment. Suitable for pools, spas, paddling pools, and bathtubs.

Use these chlorine-free sanitising granules before each cold tub or ice bath use to maintain clean, clear bacteria-free water....

1. Use eco3spa Step 3 prior to each use of your ice bath.

2. Use 5g of sanitiser granules (approximately a teaspoon full) for every 300 litres of water in your cold tub.

3. If you do not use your cold tub, apply a maintenance dose of the same quantity of sanitiser each week.

These sanitiser granules are independently tested and proven to eradicate bacteria at least as efficiently as chlorine, but without any smell or risk of skin irritation.

Note: This product can be used without adding Eco3Spa Step 2 Cold Tub Water Conditioner. However, we recommend using the Water Conditioner as it helps protect your skin while enhancing the sanitising performance and algae-fighting effectiveness of the granules.

Active IngredientsUndiluted granules contain pentapotassium bis(peroxymonosulphate) bis(sulphate), dipotassium peroxodisulphate, potassium hydrogensulphate.
On reaction with water hydroxyl and sulphate ion radicals are generated with benign bi-products.

It's as easy as 1,2,3!

• Step 1 Clean - add a bottle to the water at every 3 monthly water change

• Step 2 Condition - simply add to the water monthly

• Step 3 Sanitise - add a tablet to the water before each use

Full instructions....

Step 1 Clean

Start using eco3spa when you are ready to change your existing hot tub water.  The first step is to use Step 1 - Hot Tub Cleaner to remove biofilm and body fats from the pipework and all surfaces of your hot tub.  If you are starting with a brand new spa then there will be biofilm growing in the pipework from when the tub was wet-tested in the factory.  Similarly, if your hot tub has been left empty it will have been damp, so you still need to complete this step.

1. Ensure the tub is full of water to 50mm above all jets and air vents. Open all air inlet valves and centralise any diverter valves.

2. Remove any fitted head rests and remove the filter(s) from their housing.

3. Tip the bottle of eco3spa Hot Tub Cleaner into the water, reserving a small amount of the product to clean the shell of the hot tub and head rests after the flushing process.

4. Turn on all jet pumps and air blower, if fitted, and run for at least 60 minutes. It is normal for foaming to occur and dark coloured biofilm particulates to be seen.

5. Allow the water to stand for at least 30 minutes and then turn on all jet pumps and air blower, if fitted, and run again for a further 30 minutes.

6. Drain the hot tub. The drained water is safe to empty onto grass or plants.

7. As the water drains down, wipe away any visible residue left on the acrylic shell and rinse the surfaces with fresh water. Wipe away any stubborn scum marks by sparingly using a small amount of the reserved cleaner on a soft, clean cloth.

8. Rinse away the cleaner well or foaming may occur when the tub is refilled.

9. When the tub is completely drained, refill with clean water and clean and replace the filter(s) and head rests.

Step 2 Condition

Use eco3spa Step 2 - Water Conditioner immediately after cleaning your hot tub with eco3spa Step 1 - Hot Tub Cleaner and filling with fresh water.

1. Turn on all air and water pumps and add 300ml of Water Conditioner (for hot tubs up to 2,000 litres). Use in conjunction with eco3spa Step 3 - Water Sanitiser Tablets as described below.

2. Add a further 300ml after one month and the final 300ml one month later.

3. After 3 months clean the hot tub with eco3Spa Step 1 - Hot Tub Cleaner and start the process again.

Step 3 Sanitise

Use eco3spa Step 3 - Water Sanitiser Tablets immediately after adding eco3spa Step 2 - Water Conditioner and before each hot tub use.

1. After cleaning and conditioning the water add 2 Water Sanitiser Tablets.  It is preferable add the tablets to the filter compartment with the pumps running. If this is not possible then use a fully opened floating dispenser to dose the tablets and ensure that they have fully dissolved before using the hot tub.

2. Prior to each hot tub use add an additional tablet.

3. If you haven't been using your spa you just need to ensure that you add at least 2 tablets each week.

4. If the water ever becomes dull or foamy add an extra tablet daily until the problem subsides.

if you want to test, do so after the eco3spa Sanitiser tablet(s)/granules are completely dissolved.

The ideal Active Oxygen level is shown on the graduated colour scale on the side of the test strip container.

Simply dip a strip into the spa water and compare with the colour chart shown as 'OK' on the container's label.

If no level is shown then add a sanitiser tablet/spoonful of granules and test again when the sanitiser is fully dissolved and circulated.

These strips test for Active Oxygen only. There is no need to test for pH or Alkalinity as eco3spa works independently of these factors.

Suitable for both hot tubs and cold plunges. Simply dip the strip into the water and compare the colour to the chart. If the reading is in the "OK" range, your sanitiser level is correct.

Cold Plunge: Test at least once a week. Increase to every 2–3 days with frequent use.

Hot Tub: Test at least twice a week and always ensure the sanitiser level is in the "OK" range before use.

• Restores your heat pump's efficiency

• Removes dust and grease

• Effective in minutes

• Flexible bottle with spray

• Use without rinsing, acid-free

CLEANPAC Poolex: Pool heat pump evaporator cleaner for our poolex Ospa Heater /cooler

CLEANPAC from POOLEX maintains your heat pump's evaporator, preventing your pump from clogging up with debris, dust, grease...

This bottle is flexible with spray. No rinsing required. It removes dust and grease effortlessly and is effective in just a few minutes.

• User Manual

The dispenser you need for your small pool.

With this floating dispenser, the water in your Hot tub / Ice Bath or Pool will always be in good condition to bathe in.

Inside the dispenser you can insert a tablet of up to 3.8 cm in diameter to treat the water (not included).

This dispenser is very practical to use in size and design since its circular shape helps it to carry out its job better.

It has a lid with small holes which ventilate the inside.

The accessory is manufactured with hard-wearing non-corrosive materials.

Perfect for dispensing 20g Tablet  into a pool or spa.

Optimal filtration down to 3 microns | For pools up to 75m³

View poolstar Filter Maxspec sheet HERE

PLEASE NOTE:

- You also need to order the Intex Connectors for stock tank to connect to your tank

- The Filter Max pro comes with a 2 pin European plug. You will need an adapter and a sheltered area or an electrical box big enough to hold them both.The Filter Max pro comes with a 2 pin European plug. You will need an adapter and a sheltered area or an electrical box big enough to hold them both.

THIS IS NOT A COMMERCIAL GRADE FILTER

* Please get in touch if you wish to collect from our base in Sallynoggin , Co. Dublin free of charge.

3 in 1 - Heating / Cooling / Chilling

The 3-in-1 heating / cooling / chilling function of the O'Spa heat pump revolutionises the spa experience by offering incomparable versatility. This innovation not only heats your spa efficiently for warm, soothing relaxation sessions, but also cools it quickly for ideal use as a cold plunge.

Thanks to this advanced technology, you have total control over the temperature of your spa, allowing you to create the perfect ambience, whatever the season or your personal preferences.

Enjoy ultimate flexibility and unrivalled comfort with the O'Spa heat pump, which combines performance, efficiency and versatility for an incomparable spa experience.

THIS IS NOT A COMMERCIAL GRADE HEATER / COOLER

View Poolex Cooling / Heater device spec sheet HERE

Find out how to install and care for it in this video

https://www.youtube.com/watch?v=F0uiQPV0_xg&t=38s

• Please note that the Heater / cooler comes with a 2 pin European plug. You will need an adapter and a sheltered area or an electrical box big enough to hold them both.

• * Please get in touch if you wish to collect from our base in Sallynoggin , Co. Dublin free of charge.

You will need these Intex Connectors to make the connection between your stock tank and filtration system.

The Intex (26004) Above Ground Swimming Pool Inlet Air Water Jet Part Kit is designed to enhance water circulation in all of our Stock Tank Pools.

Key Features:

• Compatibility: Suitable for all pools with 38mm (1.5-inch) hose connections.

• Improved Circulation: The air nozzle set helps in better water movement, ensuring even distribution of chemicals and temperature.

• Easy Installation: Designed for straightforward setup with all of our Stock Tank Pools.

• Durable Construction: Made from high-quality plastic materials to withstand pool chemicals and UV exposure

• * Please get in touch if you wish to collect from our base in Sallynoggin , Co. Dublin free of charge.